The 9 Things Your Parents Teach You About Repair Patio Door Lock
How to Repair a Bad patio doors repair Door Lock
A safe patio glass repair door is an essential part of home security. If it becomes difficult to lock, it can be a nightmare.
A lock that is not working can be caused by misalignment, or simply wear and wear and tear. It's possible to fix the function of the lock by adjusting or lubricating the lock. If these methods don't work you can replace both the mortise as well as the handle.
Clean and Lubricate
Over time, dirt, dust and grime can make it difficult to open and close the door lock. A regular cleaning and lubrication routine can prevent your security device from becoming stiff or stuck, saving you money on repairs and allowing your door to enjoy its full lifespan.
The first step is to clean your lock the cylinder. Use WD-40 or another penetrating spray to do this. Spray a small amount into the keyhole and work the key into and out to distribute the oil. Avoid using household oils or other solvents that can damage your locks, and make sure you spray some on the key itself.
When your lock's cylinder is clean it's time to lubricate. You can use a silicone spray or dry lubricant such as graphite powder. Graphite powder lasts for a long time and doesn't swell up like liquid lubricants do, so it's a great choice for lubricating locks that stick. Silicone sprays are water-resistant and can withstand moist and freezing temperatures, however it may require several coats to be effective.
You can also use a de-icer spray, which is specifically made for colder weather and will remove frost and ice from the lock mechanism. A couple of sprays will help your lock unlock and then lock again easily.
How often you need to lubricate your locks will rely on environmental factors. A location near the coast will expose your door to salty air and cause corrosion. Temperature variations can influence the efficiency of your lock. It is recommended to regularly lubricate your locks at least two times every year, or more frequently when you live in an area with severe weather conditions. Lubricating your patio door locks can help save money on repairs, and ensure that it will continue to function properly for a long time.
Reposition the Lock Cylinder
If your patio door lock does not work properly there's a chance that one or more of its components may be damaged or misaligned. Regular inspections and prompt repairs of a broken lock on your patio door can stop further damage and increase the security of your doors. You can repair patio door, you can try these out, the patio door that is locked or unlocked by tightening loose screws, altering the lock mechanism, or replacing the lock cylinder.
Begin by looking at the exterior and the interior of the lock to determine if there are any signs of damage or misalignment. The patio door repair door locks may expand or contract depending on the weather, and may even shift over time. This slight movement could cause the locking mechanism to become misaligned and cause issues when closing or opening the door.
Examine the keyway hole of the lock cylinder. A corroded or blocked cylinder may be difficult to open and can eventually cause damage to the pins, cams or latch springs. If the cylinder isn't fitting easily, you can clear any obstructions with a pair of picklocks and tweezers. If the issue continues then you'll need to remove the cylinder and disassemble it to locate the source of the obstruction.
If the lock cylinder isn't screwed into the lock body you can loosen it by uncrewing a flat screw inside the cylinder's faceplate. Loosening this screw will allow you to rotate the cylinder and could help to restore alignment.
Examine the cylinder for a tiny tab that moves upwards and downwards with the key, usually towards the end. This small clip, sometimes known as a "release Tab" will stop the cylinder from sliding glass patio doors repair into the lock body in the entire way. A standard key can slide this tab back to let the cylinder out and allow it to be removed and put back in.
If the lock cylinder has become stuck, you can restore alignment by rotating the cylinder until the latch bolt is engaged with the strike plate. The handle or knob may then be pushed and withdrawn. After you have restored the proper alignment, reassemble the lock and check its functioning. If your patio door lock is difficult to use, it's a sign that a component, like the latch or latch spring is damaged or worn out and may require replacement.
Make sure you tighten the Screws
Locks for patio doors are susceptible to damage from regular use, extremes of temperature dust and dirt. If they are not properly taken care of, these delicate parts can wear out and cause your door to fail to lock properly. Most lock issues can be solved with just a few steps.
It is recommended to first clean the lock mechanism. Make use of a damp cloth to clean any dirt or dust that might be present, and then dry the lock thoroughly. After cleaning some silicone-based lubricant can keep the moving parts running smoothly and effectively. Avoid lubricants with oil bases, however they can attract dust and debris which can cause further problems.
If your patio door has a security foot lock be sure that the foot lock is properly aligned with the strike plate. In most instances, this will require adjustment of the screws that hold the foot lock to the frame of your patio door. To adjust the foot lock simply loosen the screw using the help of a Robertson screwdriver, and then gently push it up or down. Once the adjustment is complete you can tighten the screw.
The most frequent issue in the repair of patio door handles is misalignment of the strike plate and latch. This could be due to normal wear and tear, or it could simply be due to the fact that the latch is set higher or lower than it should be.
Then, take out the handle from the old one and locate the screws or bolts that hold it in place. Be sure to keep track of these since you will need them when installing the new handle. Then, take off the old spindle, and then slide the new spindle into place on the inside of the door, ensuring that it is properly aligned with the holes in the interior and exterior handles. Once the new spindle is installed then reinstall the handles for both exterior and interior, making sure that they are in alignment with the screws or bolts which hold them in place.
After you've made any needed adjustments to your patio door, be sure to test it by closing and locking the door. If everything is in proper alignment, the door will open and close smoothly without additional force. If you're still having problems, you may need to move your strike plate or latch or replace the lock cylinder.
Replace the latch
If your patio door locks still do not work, it might be time to replace the latch. The majority of homeowners can replace the lock themselves. Start by sliding the patio door completely open and then removing the current lock from the inside of the door. Carefully study how the existing lock is screwed into the door and the jamb so that you can get a sense for what kind of lock you'll have to purchase.
Before installing the new latch, loosen the screws that hold the strike plate. This is the portion of the lock that is mounted on the edge of the door's frame. Adjust it either horizontally or in the vertical direction to align it with the holes in the latch. Once you have repositioned the latch plate then tighten the screws and screw it into place.
After all the components have been repositioned or changed, assemble and secure the patio door as instructed by the manufacturer. After you're done, test the latch to make sure that it fits and catches the latch's hasp when the door is closed. If it does the lock will be able to latch onto the door. If it does, your wood patio door repair door lock is now working exactly as it should, and is able to provide you with the security and privacy you've come to expect from your doors.
Like other parts of your home your patio doors also need to be properly aligned for them to work efficiently. Over time, heat cold, dirt and debris can cause frames and hinges to shift. Incorrectly aligned hinges, door frames, and locking mechanisms are like trying to put keys into the wrong keyhole. It doesn't work. If you follow these steps, you will be able to fix an issue that seemed unfixable. You should pat yourself on your back for tackling the task and reclaiming the patio door's closed position! We bet that you'll not have any issues opening or closing your patio door once more. Good luck! We are here to assist in case you require any assistance or have questions.
