9 . What Your Parents Teach You About Patio Door Lock Repair
Patio Door Lock Repairs
Over time, the wear and tear could cause lock malfunctions. Fortunately, there are several simple and efficient methods that can restore your uPVC patio door's security.
Whether it's realigning the lock or cleaning the mechanism that locks, these quick fixes can help you make your home more secure.
Clean the Lock
patio Door lock Repair doors are ideal for letting the outdoors in and keeping out the elements. However they could pose an issue for security in the event that the lock isn't working properly. As time passes wear and tear, cold and hot weather dirt and debris could affect the lock of your patio door and cause it to become difficult to open. With a little attention, you can make sure that your lock for your patio door always functions correctly.
It's essential to clean your patio door's lock and all its moving parts. This helps get rid of any grime and coatings that may hinder the lock from working in the way it should. Begin by wiping down the moving parts of your patio door repairs door's lock with a damp cloth, then use a scouring pad or rough damp cloth to scrub any difficult-to-access parts of the door and frame that are covered in dirt. It is recommended to wipe the entire lock using dry cloths to eliminate any remaining dampness, and allow it to dry completely before applying it to the next time.
If your patio door repairs near me door uses pin-tumbler latches You can apply powdered graphite to the key. You can also apply a Teflon oil like WD-40 Multi-Use Product. This type of lubricant can be applied easily and doesn't dissolve over time. If you're unable to find the right lubricant for your lock, apply a pencil that has a thicker tip. Put the pencil in the lock, then shake it to distribute the graphite.
Regular maintenance is also essential to keep the tracks of sliding patio doors free from dirt, dust and debris. They are particularly susceptible to ice, snow, and other particles, which can cause them get stuck or to bind. This can make it difficult for your patio door to open and shut.
You can clean the track rails and rollers on sliding patio doors by removing any weather stripping that is dirty or damaged. Clean it, then replace it. Patio door rollers can also be cleaned and sprayed with an oil that is nonstick.
Lubricate the moving parts
uPVC French Doors, like sliding patios, are operated with 3 to 4 or sometimes, 5 points locking mechanisms. This includes the handle and lock cylinder that is operated with a key. These doors also require maintenance, and specifically lubrication of the moving parts. This can be done with an oil that is thin (never WD40) and should be done every year.
If the hinges aren't causing the issue it could be because the door is not aligned. It could be rubbing or catching against the hole of the strike plate in the frame. The solution is to remove the strike plate and use an abrasive chisel, which will enlarge the mortise it sits in. This will permit the latch to fit properly into the hole, and stop it from rubbing against the frame.
When the cylinder is out of the way take a measurement of its width using an object or a piece of wood that will fit in the adjustment screw gap above the lock. The outer dimension is the distance from the outside of the door to the middle of the cylinder. the inner dimension runs from the center of the adjustment screw to the end of the cylinder.
Verify the width of the lock.
If your patio screen door repair door latch isn't able how to repair tilt and slide patio door turn even after oiling and cleaning it's possible that it is not aligned with the strike plate. Examine if the door is in balance and if the hinge screws are secure however, in many instances shifting the strike plate upwards or downwards can correct the issue.
The latch may not be able to engage properly in the event that the strike of the lock is not large enough. In this instance, you can widen the opening with an hammer and chisel. Then, test the latch to ensure it doesn't rub against the jamb frame of the door or fall the frame.
Before purchasing a new lock, you should first determine the mortise type of lock you currently have. This can be done by looking at the faceplate and noting whether it is round or square. Then, take a look at the screw holes in the existing lock and note the dimensions of each one. This will help you to find a replacement lock that is the exact same width and fits into the hole that you already have.
You'll need to locate the mortise lock and inspect it for any scratches, bends or other damage that requires to be fixed. A damaged or bent latch is more likely break than one that's not frequently used, so be sure to replace the lock with a new secure and safe version in the event you notice any signs of wear or damage.
After you've examined the lock and identified which type of replacement you need then it's time to begin working on the actual repair. Take the old handle and spindle out of your patio door, and then put in the new one. Start by putting in the handle in the interior, aligning it with the spindle, and then securing it by using the two bolts or screws that secure it. Once the interior handle is in, install the exterior handle and screw it into place as well. Once you have completed these steps check the handles to make sure that they open and shut easily and that the latch engages properly with the strikeplate.
Check the door's Strike
The strike plate and door latch are two pieces which work together to secure the door. A misaligned strike plate or door latches will cause the latch to not latch the door correctly. This problem is usually very easy to repair.
Check the holes for receiving of the strike plate to ensure they are clear of obstructions like dirt or plastic plugs. Loosen the keeper screws holding the strike plate in position. This allows it to move vertically, but not separate it from the frame. Then, adjust the strike plate so that its receiving holes align with the latch hooks on the door latch. Once the strike plate has been adjusted, tighten all screws and test to see whether the door closes smoothly.
Door strike plates can be a bit difficult to access for homeowners who have sliding patio doors, but they're essential to lock and unlock your door. The metal plates are situated at the top and bottom jambs of the door, where they support its latch. The door latch slides onto the strike plate and forms an airtight seal. If the strike plate is damaged or rusted or not properly installed the latch may not properly lock the door.
One of the most common reasons for an outdoor door lock to become stuck or not close is a misalignment between the latch and strike plate. This can be verified using the "lipstick" test. Rub some lipstick along the edge of the deadbolt, then cover it with masking tape. The lipstick will leave an impression when you shut the door. This will indicate exactly where the latch connects to the strike plate. If the mark is too high or low you can adjust the strike plate.
Sliding patio door locks help protect your home from burglars. If they're not working correctly, you must repair the issue quickly. Follow these easy steps to fix your patio door lock and restore it's function.
